Mungkin ada beberapa ip address games online yang masih belum masuk dalam list ini, jadi silahkan lakukan penambahan jika masih ada yang kurang. Tutorial Cara Install MikroTik di VirtualBox Copy Paste Script Address List GamesĬopy paste script address-list games berikut ke terminal mikrotik, ini nanti berfungsi untuk memisahkan koneksi games online dengan koneksi lainnya. following are one example: /ip firewall address-listĪdd address=10.0.0.20-10.0.0.Copy pastekan script address list berikut ke terminal mikrotik, address list untuk ip lokal dibawah ini saya buat global, jika ada penyesuaian untuk kondisi ditempat anda, silahkan anda sesuaikan terlebih dahulu /ip firewall address-list add address=10.0.0.0/8 comment="++ client" list=local add address=172.16.0.0/12 list=local add address=192.168.0.0/16 list=local You need simple queue with PCQ in order to control all (or specific range) users bandwidth. To make sure fasttrack does not interfere with other configuration Hotspot universal client, vrf assignment, so it is up to administrator Traffic-flow(restriction removed in 6.33), ip accounting, ipsec, ![]() Simple queues, queue tree with parent=global, ip Fasttracked packets bypass firewall, connection tracking, This is the reason whyįasttrack-connection is usually followed be identical action=accept Likely to see some packets going through slow path even thoughĬonnection is marked for fasttrack. Note that not all packets in a connection can be fasttracked, so it is IPv4 FastTrack handler supports NAT (SNAT, DNAT or both). Currently only TCP and UDP connections can be actuallyįasttracked (even though any connection can be marked for fasttrack). Use firewall action "fasttrack-connection" to mark connections forįasttrack. ![]() IPv4 FastTrack handler is automatically used for marked connections. ![]() It's mentioned very clearly in the documentation. "defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \Īdd action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=\Īdd action=masquerade chain=srcnat comment="masquerade hotspot netĭisable any fasttrack rules on your firewall.įasttrack will bypass pretty much the whole stack - including the queues. Set allow-remote-requests=yes servers=4.2.2.4Īdd chain=input comment="defconf: accept ICMP" protocol=icmpĪdd chain=input comment="defconf: accept established,related" connection-state=\Īdd action=drop chain=input comment="defconf: drop all from WAN" in-interface=\Īdd action=fasttrack-connection chain=forward comment="defconf: fasttrack" \Īdd chain=forward comment="defconf: accept established,related" \Īdd action=drop chain=forward comment="defconf: drop invalid" connection-state=\ Name=uprof1 open-status-page=http-login transparent-proxy=yesĪdd limit-at=30k/30k max-limit=30k/30k name=queue1 queue=default/default \Īdd bridge=bridge comment=defconf interface=ether2-masterĪdd auto-isolate=yes bridge=bridge interface=wlan1Īdd address=192.168.88.1/24 comment=defconf interface=bridge network=\Īdd address=10.5.50.1/24 comment="hotspot network" interface=ether2-master \Īdd comment=defconf dhcp-options=hostname,clientid disabled=no interface=ether1Īdd address=10.5.50.0/24 comment="hotspot network" gateway=10.5.50.1Īdd address=192.168.88.0/24 comment=defconf gateway=192.168.88.1 Set authentication-types=wpa-psk,wpa2-psk mode=\ĭynamic-keys wpa-pre-shared-key=noor3664 wpa2-pre-shared-key=noor3664Īdd dns-name=so.zzz hotspot-address=10.5.50.1 login-by=http-pap name=hsprof1 \Īdd name=dhcp ranges=192.168.88.10-192.168.88.254Īdd name=hs-pool-2 ranges=10.5.50.2-10.5.50.254Īdd address-pool=dhcp authoritative=after-10sec-delay disabled=no interface=\Īdd address-pool=hs-pool-2 interface=ether2-master lease-time=1h name=dhcp1Īdd address-pool=hs-pool-2 addresses-per-mac=1 interface=ether2-master name=\Īdd address-pool=hs-pool-2 advertise=yes advertise-interval="" advertise-url="" \ ![]() Set band=2ghz-b/g/n channel-width=20/40mhz-Ce \ĭisabled=no distance=indoors frequency=auto mode=ap-bridge ssid=PNG1 \ I create a queue for target = wlan and set the limit downloa and upload = 64k, but when i test it, this seems not working correctly!Īdd admin-mac=E4:8D:8C:46:C7:0F auto-mac=no comment=defconf name=bridge I have a mikrotik router and i want to limit the speed of wlan users.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |